Learn the step by step basic troubleshooting actions that are safe to follow, to solve the problem with your Samsung Galaxy J3 that won’t turn on before you take any drastic action with the phone. Follow these step-by-step instructions on how to turn the … If this is the case, when the device is activated in safe mode the display should respond again.
Unmounting the microSD card before removing it is recommended but since this couldn’t be done since your phone is dead in the first place, just go ahead and remove the SD card from the slot.
Nous vous suggérons de réchauffer régulièrement l'écran au fur et à mesure des étapes pour plus de simplicité. Le châssis externe de votre Galaxy J3 2016 est désormais démonté. This might help if your device is just frozen and stuck on black screen but still has power. Before despairing, it is advisable to do some tests to rescue the equipment. Terminez enfin par le côté droit du téléphone puis procédez au retrait du châssis.
Bring it to a technician or repair shop to have professional people to look at it. The battery indicator may take up to 10 minutes to show up on the phone’s screen especially if the battery was completely drained.
While the battery is disconnected, press Power button for one full minute. Grâce à cette réparation nous réduisons tous notre empreinte carbone. Finally, if none of this works, then the manufacturer should be contacted to ask them to evaluate whether to repair or replace equipment.
Poursuivez ensuite sur la partie haute du téléphone. Release held keys as soon as you can see the Samsung logo. Pour ceci, appuyez sur le bouton d'allumage durant quelques secondes puis confirmez l'extinction par "Éteindre". I had the same problem with my Sony xperia phone but my phone totally crashed couldn't open it at all. 4. I turned off the phone by removing the battery so I could reboot - with the power button not responding, the phone will not … Insert the nylon spudger in the top left interstice of the screen. Pour remonter votre Samsung Galaxy J3 2016 suivez ce guide en sens inverse. Since this phone has removable battery, all you need to do is release the battery.
SOSav s'engage pour la planète.
Déclipsez ensuite le plastique de protection du connecteur de l'écran grâce à la spatule en nylon. In this mode, Android interface won’t be loaded, which means if the problem happen due to firmware issue, then it will boot up nicely.
In this case, your phone has power but something is making it stuck on black screen.
Ne forcez en aucun cas, soyez très délicats lors de cette opération afin de ne pas endommager l'écran !
Connect your phone to a computer then attempt to restore firmware with Samsung Kies.
Now press the power key for few seconds untill Samsung Galaxy J3 (2017) logo appears.
Make sure that the charging icon is displayed on the screen to ensure you that the problem is not hardware related. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them. Faites ensuite glisser la carte MicroSD à l'aide de votre doigt pour l'extraire de son logement. Be sure to alight the gold battery contacts with the contacts in the battery compartment then gently press it into place.
If they don’t work or if you still need further assistance, then fill up our, Potential solutions to fix Galaxy J7 that won’t turn on or stuck on black screen. Locate the other notch on the lower-right corner of the battery then lift the battery out. Put a checkmark on the box next to I have read all of the above information.
It can be a system bug, corrupt file, or rogue app that’s preventing your device from powering up or finishing the bootup process. Do you have the spare parts to do the repair ? But rest assured we read every message we receive. It can easily break. Similar to a soft reset and forced restart, battery removal can likewise help fix minor software glitches affecting the phone’s power functions. On the other hand, you may consider it a software issue if it suddenly occurs to your phone that couldn’t power on without any prior instances of dropping or liquid exposure on the phone. Insérez la spatule en nylon dans la partie inférieure de la batterie (photo 1 de cette étape).
Pour allumer le Samsung Galaxy J3 (2016), vous devez appuyer sur le bouton power et si vous répétez la manoeuvre plusieurs fois par jour, il est possible que ce bouton soit usé, cassé ou abîmé !
Solutions & Tips, Download Manual, Contact Us. Performing a full system reset will eliminate whatever the culprit is and thereby prevents your device from getting stuck again when booting. This guide is for replacing the power button cable on the Samsung Galaxy J3 2017.
The power button cable of your J3 2017 is now disassembled. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them. If you suspect that the battery might have been damaged, then try to replace it with a new one and see if that yields a positive outcome. Charge the phone and let it be for a couple of minutes before try to turn it back on. N'insérez pas la spatule iSesamo au delà de 0,5cm au risque de couper des nappes situées sous l'écran. Suddenly the touch magic disappears.
Mais rien n'est un problème avec SOSav ! Release the power key then and press Volume down button. Save my name, email, and website in this browser for the next time I comment. If this is the case, contact the manufacturer of the equipment.
C'est pour cela que nos techniciens ont réalisé ce guide de réparation illustré et commenté afin de vous dévoiler tous les détails pour changer le bouton power du J3 (2016) vous-même à un tarif imbattable. We are always open to your problems, questions and suggestions, so feel free to contact us by, . While plugged into a wall outlet, press and hold the Power and Volume Down buttons simultaneously for about 10 to 20 seconds or until the Samsung logo appears.
Here’s what you should do then.
If it is available, click, You will see the firmware version along with a note that the information on your device will be permanently deleted during the process. When your Samsung Galaxy J3 refuses to power on, it likely denotes a hardware issue otherwise, software malfunction. Samsung Galaxy J3 2017 that Won’t Turn On – Troubleshooting guide for an issue that happen to a smartphone such as Samsung Galaxy J3 2017 requires more than just step by step solution. If you have an available computer with Samsung Kies software installed, try to use it in saving your device.
Grab and remove the home button with the pair of tweezers. The power button cable of your J3 2017 is now disassembled. button to reinstall the firmware on your device.
When it’s finished, click. You can remove the connector bracket from the screen. The Galaxy J3 2017 screen is strongly glued to the frame. Fixes for Samsung Galaxy S7 power and volume buttons not working. You can replace it with a new one if needed. You can replace it with a new one if needed. The good point about it is that you can have the repair done at home, at work or at a coffee shop !
To make sure this isn’t causing your trouble, try to remove any microSD card from your phone’s SD card slot and then reattempt to turn it on. La carte MicroSD de votre Galaxy J3 2016 est désormais démontée.
Veillez à ne pas enfoncer trop profondément la spatule afin de ne pas endommager la carte mère. Samsung has a default setting that turns these keys turned off when the Galaxy J3 is in its energy saving mode. It’s also a safe process since it will not affect your phone data. Align the battery cover then gently press to snap the cover into place.
Fixed – Microphone not working on Samsung Galaxy J3 2017.
To fix the problem, you will need to identify the culprit and get rid of it. How To Fix Samsung Galaxy J3 (2017) Touch Screen Not Working. Our goal is to make repairing accessible to all. One possibility that you need to consider in this case is that your phone might have completely ran out of battery and therefore, all it needed is a recharge to be able to power up again.
Samsung Support UK Grab the screen and flip it over to a 180° angle as shown on the pictures. If the problem occurs after you dropped your phone or got it wet, then most likely it’s hardware damage and therefore needs repair or service.
In order to remove the screen, you have to heat it up for 3 to 5 minutes with a hair dryer. Procédez à son remplacement par un bouton neuf si cela est nécessaire. The phone will be restarted.
First method: In the first step power off the SAMSUNG J330 Galaxy J3 2017. The home button of your Galaxy J3 2017 is now disassembled. La carte SIM de votre Galaxy J3 2016 est désormais démontée. This seems to be a common problem for the Galaxy S7 and S7 Edge devices. Before disassembling the power button cable of your Galaxy J3 2017 Double SIM, you first have to turn it off for safety reasons. Remontez doucement vers le haut du téléphone en faisant levier sur chacun des clips en plastique.
Boot the phone into two different special modes, Safe Mode and Recovery Mode. Find issues that are similar with yours and use the solutions we suggested. Saisissez l'écran puis ouvrez-le délicatement à la manière d'un livre.
Décollez le côté droit et la partie inférieure de l'écran, toujours à l'aide de la spatule iSesamo.
If it’s not working, then you may have hardware or firmware issue. Keep in mind that opting for this alternative will remove all the app and associated data. From time to time the touch screen stops responding. Follow the onscreen instructions to ready your device for emergency recovery. Gently peel off the power button cable with the nylon spudger. Usually, when the Samsung J3 power button is not working issue arises, many people don't understand why this happens. But it is not without flaws.
Soyez très délicats lors du décollement de l'écran, ce dernier étant très fin et par conséquent, relativement fragile et sensible, le risque de casse est très élevé. The phone had charge but the power button was not responding when I push it so I could not unlock the screen.
We suggest that you heat the screen bit by bit. It is also suggested to clean the screen with some of the liquids for that purpose that are sold in different stores. If you already charge the phone fully after reboot it, and still the phone won’t turn on, you can try other troubleshooting actions. Then disconnect screen cable with the nylon spudger. Utilisez la spatule en nylon afin de déclipser la coque supérieure. Afterwards press and hold together: Volume Up + Home + Power key for a couple of seconds. Samsung Galaxy J3 with its removable battery is a favorite of many people.
Booting on recovery mode means the phone trying to make sure that the entire hardware on it powered on, no firmware interference. Réutilisez la spatule iSesamo afin de déclipser la partie droite du châssis.
If it doesn’t, move on to the next workaround. Welcome to Samsung Q&A, where you can ask questions and receive answers from other members of the community. Repeat that step for the bottom part of the screen. Boot the phone to Recovery Mode is the final troubleshooting action that you can do. This is a free service we offer and we won’t charge you a penny for it.
Force your phone to restart while plugged into a charger. Grâce à nos guides de réparations nous vous expliquons comment réparer vos produits cassés plutôt que de les remplacer.
There are things that you can try to fix this issue and no need to worry because it all safe to do with very minimal risk.
Gardez la spatule en nylon en main afin de déconnecter ensuite le connecteur de l'écran. Insert the nylon spudger in the frame-connector bracket interstice of the screen and gently pry up. It is possible that the inconvenience is caused by some application.